Electrical Fire Damages 29 Palms Home
On Thursday, August 28th at 12:30 a.m., the Twentynine Palms and Combat Center Fire Departments were dispatched to a residential structure fire in the 4300 block of Mesquite Springs Road located in the City of Twentynine Palms. The sole occupant of the home smelled smoke and called 911.
Upon arrival, firefighters located smoke in the attic and traced the smoke to a smoldering fire burning in a wall and the roof trusses. Firefighters quickly extinguished the fire keeping the damage confined to one wall and some ceiling area. Damage to the home is estimated at $5,000. Investigation has determined the cause to be faulty electrical wiring located in the wall.
Now is a good time to check your batteries in your smoke detectors and make sure they are working properly. When any kind of electrical work is done in your home, try to have a professional electrician perform the work. It only takes one faulty wire to destroy your home and put your family at risk.
5 common causes of electrical fires
According to the U.S. Fire Administration (USFA), there are 28,600 electrical fires per year. These fires cause $1.1 billion in property damage and loss and are responsible for 310 deaths and 1,100 injuries each year.
The months with the most electrical fires are December and January due to increased use of heating appliances and lights. Most electrical fires start in the bedroom, but the highest number of fatalities occur with fires located in the living room, family room and den.
Some electrical fires happen because of problems in house wiring or appliance failure, but many occur due to mistakes that homeowners make like overloading electrical outlets or extension cords.
In order to prevent yourself or someone you love from becoming an electrical fire statistic, it is important to be aware of the common causes of electrical fires.
Here are the 5 most common causes of electrical fires:
1. Most electrical fires are caused by faulty electrical outlets and old, outdated appliances. Other fires are started by faults in appliance cords, receptacles and switches. Never use an appliance with a worn or frayed cord which can send heat onto combustible surfaces like floors, curtains, and rugs that can start a fire.
Running cords under rugs is another cause of electrical fires. Removing the grounding plug from a cord so it can be used in a two-prong electrical outlet can also cause a fire. The reason appliances have the extra prong is so they can be only used in outlets that can handle the extra amount of electricity that these appliances draw.
2. Light fixtures, lamps and light bulbs are another common reason for electrical fires. Installing a bulb with a wattage that is too high for the lamps and light fixtures is a leading cause of electrical fires. Always check the maximum recommended bulb wattage on any lighting fixture or lamp and never go over the recommended amount.
Another cause of fire is placing materials like cloth or paper over a lampshade. The material heats up and ignites, causing a fire. Faulty lamps and light fixtures also frequently result in fires.
3. Misuse of extension cords is another electrical fire cause. Appliances should be plugged directly into outlet and not plugged into an extension cord for any length of time. Only use extension cords as a temporary measure. If you do not have the appropriate type of outlets for your appliances, hire an electrician to install new ones.
4. Space heaters are a major cause of electrical fires. Because these types of heaters are portable, many times people put them too close to combustible surfaces such as curtains, beds, clothing, chairs, couches and rugs. Coil space heaters are especially dangerous in this regard because the coils become so hot they will almost instantaneously ignite any nearby flammable surface. If you do use space heaters, use the radiator-type that diffuse heat over the entire surface of the appliance. These are less likely to ignite flammable items, but should still be kept away from them.
5. Outdated wiring often causes electrical fires. If a home is over twenty years old, it may not have the wiring capacity to handle the increased amounts of electrical appliances in today’s average home, such as computers, wide screen televisions, DVD players, microwaves and air conditioners.
Breakers should be triggered when circuits get overloaded by too much electricity, but outdated breaker boxes often have worn connectors that do not work, causing the system to overload and start an electrical fire.